Saturday, April 23 2022

FINALLY! The Halo Magnum is complete and mounted!

I did an Army Painter Gun Metal with a couple of drops of Army Painter Matte Black. I found that the Army Painter flows through my airbrush much better than the few Vallejo paints that I have. t was still a bit too shiny and new looking, so I mixed some Army Painter Dark Tone wash with a drop or two  […]

Continue reading

Sunday, December 5 2021

Officially Finished!

Nikki's P90 build is officially finished!!!   I even whipped up the little plaque on the Elegoo Neptune 2D in black and silver dual extruded. THAT machine is a lot of fun! Now of course since she claimed that one for herself, I get to make a Triple Rail version for myself. But I plan on doing a few  […]

Continue reading

P90: Nearing the finish line!

Getting closer to the end with the P90. I have 2 coats of black, unfortunately we grabbed gloss at the store so I'm going to have to hit it with a matte sealer too. There still will be a bit of a shine but not too terribly bad. Of course Nikki claimed it for herself. I made her an SG-1 Logo plaque  […]

Continue reading

Friday, December 3 2021

P90 Going Strong

We're nearing the finish line! Just have to finish printing the sights then decide if we are going to print a magazine or get an airsoft one with the translucent body and dummy rounds.   Of course, why do a P90 if you aren't going to do a Five-seveN to compliment it.  

Thursday, November 25 2021

Got the SG-1 Vibes going!

Started on the P90. All together both body parts took about 48 hours to print. I have the upper receiver printing now. Going for the Triple Rail version.   I think after this I'll do a Walther PPK, WW2 Luger and MP40. Get the Classic German collection going.  ;-)

Sunday, November 21 2021

One and Done!

A first coat for the camo. I'll let it dry and see if I need to add some colors or if it'll work as is. I watched this video to get the technique to paint the ACR: https://www.youtube.com/watch?v=sp_XzTnBfR0 The barrel and suppressor will remain black.  Unfortunately there seems to be a  […]

Continue reading

Thursday, November 4 2021

Bolts, Bolts, Bolts but no nuts!

WoooHooo, we've got a working bolt assembly!!! The end is near!!!!  

Getting CLOSER!!!!!

We are starting to see the light at the end of the tunnel and I don't think it's a train!! Finishing printing some internals for the trigger assembly, a few body pins, firing pin, bolt and the magazine and we will be ready to paint. So what do ya think, should I pop an M203 on this bad girl? Go all  […]

Continue reading

Tuesday, November 2 2021

Work on the Bushmaster ACR continues!

WoooHooo, we've got the shakings of a barrel!!!!