Tactical / MilSim

Entries feed - Comments feed

Subcategories

Saturday, April 23 2022

FINALLY! The Halo Magnum is complete and mounted!

I did an Army Painter Gun Metal with a couple of drops of Army Painter Matte Black. I found that the Army Painter flows through my airbrush much better than the few Vallejo paints that I have. t was still a bit too shiny and new looking, so I mixed some Army Painter Dark Tone wash with a drop or two  […]

Continue reading

Sunday, December 5 2021

Officially Finished!

Nikki's P90 build is officially finished!!!   I even whipped up the little plaque on the Elegoo Neptune 2D in black and silver dual extruded. THAT machine is a lot of fun! Now of course since she claimed that one for herself, I get to make a Triple Rail version for myself. But I plan on doing a few  […]

Continue reading

P90: Nearing the finish line!

Getting closer to the end with the P90. I have 2 coats of black, unfortunately we grabbed gloss at the store so I'm going to have to hit it with a matte sealer too. There still will be a bit of a shine but not too terribly bad. Of course Nikki claimed it for herself. I made her an SG-1 Logo plaque  […]

Continue reading

Friday, December 3 2021

P90 Going Strong

We're nearing the finish line! Just have to finish printing the sights then decide if we are going to print a magazine or get an airsoft one with the translucent body and dummy rounds.   Of course, why do a P90 if you aren't going to do a Five-seveN to compliment it.  

Thursday, November 25 2021

Got the SG-1 Vibes going!

Started on the P90. All together both body parts took about 48 hours to print. I have the upper receiver printing now. Going for the Triple Rail version.   I think after this I'll do a Walther PPK, WW2 Luger and MP40. Get the Classic German collection going.  ;-)

Sunday, November 21 2021

One and Done!

A first coat for the camo. I'll let it dry and see if I need to add some colors or if it'll work as is. I watched this video to get the technique to paint the ACR: https://www.youtube.com/watch?v=sp_XzTnBfR0 The barrel and suppressor will remain black.  Unfortunately there seems to be a  […]

Continue reading

Thursday, November 4 2021

Bolts, Bolts, Bolts but no nuts!

WoooHooo, we've got a working bolt assembly!!! The end is near!!!!  

Getting CLOSER!!!!!

We are starting to see the light at the end of the tunnel and I don't think it's a train!! Finishing printing some internals for the trigger assembly, a few body pins, firing pin, bolt and the magazine and we will be ready to paint. So what do ya think, should I pop an M203 on this bad girl? Go all  […]

Continue reading

Tuesday, November 2 2021

Work on the Bushmaster ACR continues!

WoooHooo, we've got the shakings of a barrel!!!!     

Thursday, October 28 2021

Baby Glock be Done!

Painted and mounted. Just gotta let the last coat of matte clear coat dry and she's all ready! This was a tricky one. A lot of the components were modeled so there were a BUNCH of little pieces. I had to redesign the slide spring and follower though. The original was just too flimsy and weak. It  […]

Continue reading

Bushmaster ACR aka Magpul "Masada"

Cruising right along with the ACR. The silver PLA kinda gives it that Machined Aluminum look.  

Sunday, October 24 2021

Baby Glock - G26

Finally got it all printed save a couple of internal parts for the slide. I ended up reprinting the Frame and Slide. I was just not happy with the initial quality and the way the trades engraved. So I went into 3DS Max and added the trades. I TRIED to get a much higher resolution where the trades  […]

Continue reading

Saturday, October 9 2021

Is that a Glock in your pocket or are you just glad to see me?

Finally finished the Glock 17. I used files from TWO different Glock prints from Thingiverse. This one took quite a bit of fiddling around to get things to mesh together correctly. Hopefully the last mag printing now will fit right and activate the slide and barrel correctly.  

Thursday, October 7 2021

Kablammo!

Thar she is, all painted and mounted. Ain't she a beauty?      

In Case Of Emergency

Another fun little dark humor project.  

It was looking a bit lonely

While I've been working on the "Blooper" I whipped up a little sumptin' sumptin' to to dress up my M4.      Next step is to prime and paint it.  

Wednesday, October 6 2021

Boom Boom Wall

I know I had designed the display stand for the "Blooper" but when I showed my Dad (Who's a crusty old VietNam SoG vet) he got a real charge out of it. So I'm going to do up another one, get some more Rock White and finish the display stand. Then I'll give it to him for his Garage/Man  […]

Continue reading

Friday, September 24 2021

CTAF

Dave got a lot of "shit" when he opened his field way back in 2010 or so. A lot of the Austin players claimed "we don't need another field in the area", "it's just more competition for player turn out in the area". He got shit like, "his field is unsafe",  […]

Continue reading

Saturday, September 8 2018

Stress Relief a la Meat

I found a really neat game that's a great way to destress and have lots of fun. It's called "Hot Dogs, Horseshoes and Hand Grenades".   It is essentially a VR firing range with your various traditional targets and in some scenarios Hot Dogs as the OpFor. There is even a Town called  […]

Continue reading